ENGINEERING CAREER AND STUDY MATERIALS

1. In ________ machines, the size of the shaft is decided by the critical speed which depends on the deflection of the shaft. (a) small (b) medium (c) large (d) any of the above. Answer: (c) large 2. Materials exhibiting zero value of resistivity are known as ______ . (a) conductors__ (b) superconductors (c) insulators (d) semiconductors Answer: (b) superconductors 3. A control system in which the control action is somehow dependent on the output is known as (a) Open system (b) Semiclosed loop system (c) Closed loop system (d) None of the above Answer: (c) Closed loop system 4. Which of the following methods does not take into account the maximum temperature rise under variable load conditions ? (a) Method of average losses (b) Equivalent current method

Question 1:-Identify the hardest tool material  A:-Steel  B:-Ceramics  C:-Tungston carbide  D:-Diamond  Correct Answer:- Option-D Question 2:-The essential constituent of any hardened steel is  A:-Austenite  B:-Cementite  C:-Martensite  D:-Pearlite  Correct Answer:- Option-C Question 3:-The collapsible tooth paste tube are made by  A:-Drawing  B:-Deep drawing  C:-Rolling  D:-Extrusion  Correct Answer:- Option-D Question 4:-The vertical passage for bringing molten metal to mould cavity is called  A:-Sprue  B:-Riser  C:-Gate  D:-Chaplet

1. Which of the following instruments indicate the instantaneous value of the electrical quantity being measured at the time at which it is being measured ? (a) Absolute instruments (b) Recording instruments (c) Indicating instruments (d) Integrating instruments Answer: (c) Indicating instruments 2. In closed loop control system, with positive value of feedback gain the overall gain of the system will (a) decrease (b) increase (c) be unaffected (d) any of the above Answer: (a) decrease 3. For large power transformers, self oil cooled type or air blast type which of the following values of current density may be used ? (a) 1.0 to 1.2 A/mm2 (b) 1.5 to 2.0 A/mm2

1. The design of mechanical parts is particularly important in case of _____ speed machines. (a) low (b) high (c) medium (d) All the Above Answer: (b) high 2. A practical formula for determining the thickness of insulation between low voltage and high voltage windings is (a) 5 + 0.9 kV mm (6) 2 + 0.5 kVmm (c) 4 + 0.7 kV mm (d) 1 + 0.2 kVmm Answer: (a) 5 + 0.9 kV mm 3. For making a capacitor, it is better to select a dielectric having (a) low permittivity (b) permittivity slightly more than that of air

3531. The direction of electric field due +0 positive charge is . (a) towards the charge (b) away from the charge (c) both (a) and (6) (d) none of the above Correct Answer: (b) away from the charge 3532. For open control system which of the following statements is incorrect ? (a) Less expensive (b) Construction is simple and maintenance easy (c) Recalibration is not required for maintaining the required quality of the output (d) Errors are caused by disturbances Correct Answer: (c) Recalibration is not required for maintaining the required quality of the output 3533. Electrical machines having power outputs ranging from a few kW upto approximately 250 kW may be classified as (a) medium size machines (b) small size machines (c) large size machines

ELECTRICAL ENGINEERING QUESTION AND ANSWERS   From Question No. 3526 to3530 Electrical Questions with Answers published here. The Solved Electrical Engineering Question answers are very much useful for preparing the upcoming Recruitment Examinations   3526. In D.C. machines the usual limit of slot pitch is (a) between 5 to 10 mm (b) between 10 to 15 mm (c) between 15 to 20 mm (d) between 25 to 35 mm Answer: (d) between 25 to 35 mm ELECTRICAL ENGINEERING QUESTION AND ANSWERS -2019 3527. The lines of force due to charged particles are (a) always straight (b) sometimes curved (c) always curved (d) none of the above Answer: (c) always curved 3528. A controller, essentially, is a (a) sensor (b) clipper (c) amplifier (d) comparator Answer: (d) comparator ELECTRICAL ENGINEERING QUESTION AND ANSWERS-2021 3529. A Weston frequency meter is (a) moving iron instrument (b) moving coil instrument (c) dynamometer instrument (d) none of the above Answer: (a) moving iron in

3516. The household energy meter is (a) an integrating instrument (b) a recording instrument (c) an indicating instrument (d) none of the above Answer: (a) an integrating instrument 3517. Which of the following devices is used for conversion of co-ordinates ? (a) Microsyn (b) Synchro-resolver (c) Selsyn (d) Synchro-transformer Answer: (b) Synchro-resolver 3518. Induction type single phase energy meters measure electric energy in (a) kW (b) Wh (c) VAR (d) kWh